FREE
FREE
Ngày đăng: 08/03/2014
Mã sản phẩm: Semirigid 1050
Liên hệXuất xứ: Đức
Bảo hành: Liên hệ trực tiếp
Phương thức thanh toán: Tiền mặt/chuyển khoản
Khả năng cung cấp: Thỏa thuận
Liên hệ| Cable Diameter |
Max. 4.50 mm (0.177“) Min. 0.86 mm (0.034“) |
| Stripping Length | Max. 30 mm (1.18“) |
| Increments |
Length: 0.01 mm (0.00039“) steps Diameter: 0.01 mm (0.00039“) steps |
| Stripping Blades |
For turning and removing: 2 pcs. For turning: 2 pcs. (1 each) For pointing: 1 set (4 pcs.) |
| Cycle Rate | > 3 s, (depending upon cable type and programming) |
| Program Capacity | 1‘000 cables |
| Interfaces | 2x USB "Host", Footpedal, Ethernet (on request) |
| Noise Level | < 70 db (A) |
| Power Supply | 100/115 VAC, 230/240 VAC, 150 VA, 50/60 Hz |
| Air Pressure | 6 bar / 0.6 MPa / 87 psi |
| Air Consumption per Cycle | 7-30 l at 6 bar (87 psi), (depending upon cable type and programming) |
|
Dimensions (L x W x H) |
566 x 215 x 252 mm (22.3 x 8.5 x 9.9“) |
| Weight | Net 19.5 kg (43 lbs) |
| CE – Conformity | The SemiRigid 1050 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |
| Important Note | Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |
